menu close icon

Gutter refurbishment

For over 45 years, Roofclad Systems has been helping businesses across the UK protect their buildings through expert commercial and industrial gutter refurbishment. From large-scale industrial sites to complex commercial properties, we deliver reliable, long-term solutions that extend roof life.

Gutter Refurbishment

How do I know when I need gutter refurbishment?

Commercial or industrial gutters should be checked regularly, typically after any heavy storm or downpour of rain, to make sure they are free from any debris, as this is so important to maintain a fully functioning guttering system. It is not uncommon for gutters to get blocked with leaves and other debris, especially in the autumn and winter months, and dealing with a problem before it causes damage to your guttering system is so important.

With the increased rainfall and frequent heavy showers that we have become more accustomed to in recent years it has highlighted the fact that many buildings simply do not have gutters adequate enough to cope with the water volumes we are experiencing. If your gutters are inadequate you could experience water backfilling and entering the building this way.

Gutter Refurbishment

How can we help?

Industrial and commercial gutters should be inspected at least once a year and any time after a heavy storm or downpour of rain.

If your guttering system has been installed properly you should have no trouble or issues and you will be left with roof drainage for years to come. However, it is highly recommended to still get your gutter checked even if you think there may be no problems with it currently.

If your existing gutter is corroding we can offer our fabrication services to make a new gutter or create a gutter liner to install on top of your existing gutter.

The benefits of gutter refurbishment

External Wall Cladding Refubishment

Allowing water to drain freely away from your building.

External Wall Cladding Refubishment

Decrease the risk of water ingress through backfilling.

External Wall Cladding Refubishment

Preventing existing gutters from becoming blocked and unfit for purpose.

Our gutter refurbishment services

There are a number of guttering types that can be installed when conducting refurbishment works, such as:

check

A composite gutter: Supplied as one unit, that offers an excellent air tightness, consistent insulation throughout the roof area and can be installed quickly.

check

Built-up system gutter: A metal-coated twin skin gutter system with a solid flat insulation board between. This is very useful where a service run or cables require to be concealed at eaves level.

check

Single skin gutter: More commonly used for external eaves gutters as no insulation U-Value is required. The type of single skin gutters varies from UPVC half-round, 0.7mm plastisol coated steel trimline gutters and galvanised steel box gutters.

check

Gutter lining: A gutter liner formed in PVC membrane lined metal can be installed without the need to remove existing gutters or roofs. They offer a simple cost-efficient way of overlaying the existing gutter and alleviating all gutter leaks in one simple solution. Coating of an existing gutter is another method of prolonging the lifespan and eradicating water ingress into the building.

Not sure which solution you need?

Speak to our trusted team today.

Our gutter refurbishment process

1.

Consultation stage

Our Design Team can advise you about the logistics of your project. They will provide guidance on the cost and suitability of all the available gutter systems so that you find a product that meets all of your needs.

2.

Site visit and survey

A site survey will be carried out by one of our Estimators to identify the issues and take measurements, they will determine the best fit system for your needs.

3.

Quotation provided

A fully specified quotation will be provided ensuring your requirements are being met. If you are happy with the quotation provided, we would need an official order before we start our preparations.

4.

Health and safety planning

Our health and safety department will arrange for the necessary health and safety measures to be put in place, prior to any other works commencing.

5.

Construction stage

With all the necessary safety measures in place, our team of experts will get to work on refurbishing your gutters.

6.

Handover stage

When all works are completed and approved by the client our operatives will clear the site and warranties will be arranged, where necessary.

FAQs

  • My gutter has internal downpipes, is this an issue when refurbishing gutters? open button

  • Do I need to replace the downpipes if my gutter is getting refurbished? open button

  • My gutter is between my building and a neighbouring property, who is responsible for the refurbishment? open button

icon

Midlands (Head Office)

9-10 Titan Way
Britannia Enterprise Park
Lichfield
Staffordshire
WS14 9TT

icon

North East

Roofclad Systems Ltd
Wylam Close
Stephenson Industrial Estate
Washington
NE37 3BE

icon

Yorkshire & Humber

Roofclad Systems Ltd
4100 Park Approach
Thorpe Park
Leeds
LS15 8GB

icon

North West

Roofclad Systems Ltd
600 Lakeside Drive
Centre Park Square
Warrington
WA1 1RW

icon

Scotland

4–5 Lochside Way
Edinburgh Park
Edinburgh
EH12 9DT

icon

South

The Blade
Abbey Square
Reading
Berkshire
RG1 3BE

Get in touch with our team to find out about our comprehensive range and get a quote.

Head Office Telephone

Email

Connect with us